name of medication

January 28, 2010

Hull Construction – Twaron, Kevlar, Chopped Mat, Roving, Vinylester, Epoxy Resin, Airex, Balsa

Filed under: Yachting — Tags: , , , , , , — Richard Jordan @ 2:09 pm

Fiberglass is made of fibers composed into fabrics then layered with resins. Between layers of fiberglass, sometimes builders use a core material.

Fiberglass Fabrics

Fiberglass Fabrics

Fibers
E-glass and S-glass are the common fibers. Some production builders use E-glass which is 5-10 times less expensive than S-glass. Others use S-glass which is 20-40% stronger than E-glass. Even other builders combine the S and E glasses. Kevlar is a higher quality glass used by the best manufacturers. Hylas uses a variant of Kevlar called Twaron which makes Hylases “bullet-proof” we boast. Twaron is 2 times as strong as S-glass and 60% lighter than normal fiberglass. It is 5 times as strong as steel. While Kevlar has great tensile strength, many times builders combine Kevlar with S-glass because Kevlar alone has inferior compressive strength. Carbon fiber is another fiber but rarely used in layup because of poor impact strength. Spars are composed of carbon fiber.

Fabrics
Chopped mat is one type of fiberglass fabric composed of short strands chopped and bound in random orientation. This randomness makes the fabric water resistant. Because of its water resistance, builders use a layer of chopped mat under the gel coat. Woven roving consists of alternating strands weaved at 90 degree angles. This roving has superior tensile strength especially between the warp and weft strands. Layers of woven roving do not bond well to each other and should have a layer of chopped mat in between. The roving quickly builds up hull thickness. A final fabric is unidirectional roving. Unidirectional roving consists of fiberglass strands all going the same direction lightly stitched together athwart. Unidirectional roving is the strong along the strands but has little strength at 90 degrees. Builders use this type for stringers, beams, and frames. Biaxial roving consists of 2 layers of alternating, 90 degree crossed unidirectional roving layers. Tri-axial roving consists of 3 layers all at different angles. These axial rovings are the strongest yet harder to handle and spread with resin.

Resins
Polyester resin is the least expensive. It should be isophtalic not orthophtalic. Builders spray the polyester resin into female molds for the gel coat. Polyester pleases cosmetically, is scratch resistant, UV protective, has impact strength, and retains color well. Vinylester resin is a higher quality resin for layup although many builders use polyester. Queen Long for Hylas uses vinylester. Vinylester shrinks less during curing for good inter laminate bonds. When owners do blister jobs say on the infamous Valiant 40 blister boats, they use vinylester resin because it prevents blisters. Finally, epoxy is the finest in quality. It is water resistant, shrinks little, but is costly, toxic, and difficult to work with. Henry Mustin, a local surveyor notes how epoxy is a bad idea for the gelcoat as epoxy is less UV resistant than polyester.

Cores
Cored fiberglass improves the stiffness, lessens the weight, and reduces the cost. This improves durability and performance. Balsa core is the easiest to work, least expensive, and has excellent stiffness and compressive strength. C&C discovered the benefits of balsa in the 1960’s. Balsa is a less efficient weight saver and more vulnerable to water saturation. Henry Mustin, a local surveyor, says balsa should not be used to core a hull underbody and “if this sounds like a condemnation of balsa below the waterline, it probably is!” Airex or rigid non-cross linked PVC foam is more expensive but more water resistant. Cross-linked PVC foam is stiffer but more brittle than Airex. Finally, honeycomb cores of aluminum or aramid paper are the lightest and strongest of all but cost much more than balsa or foam. Honeycomb coring is rare except on custom racing sleds. Hylas has used either balsa or Airex cored decks with solid fiberglass hulls.

Conclusion
Fiberglass consists of fibers bound into fabrics glued together in layers by resins. Core material is in between two fiberglass sheets. Example fibers include S-glass, E-glass, Twaron, and Kevlar. Example fabrics include chopped mat, woven roving, unidirectional roving, and associated bi and tri-axial rovings. Resins include polyester, vinylester, and epoxy. Cores include balsa, Airex, and honeycomb. These basic decisions by the builder and the skill in executing them are critical to a hull’s soundness. As one client noted to me, “When you are buying a boat you are really buying three things: the workmanship, the materials, and the design. And you need to have all three of these for a good boat.”

Looking to Purchase or Sell Your Yacht? Please Contact Us.

Our professional and knowledgeable brokers are not only attuned to the ever changing international market but also have thousands of bluewater miles under their belts. We have the experience and integrity to ensure that your purchase of a boat will be a decision that you can be proud of.

Jordan Yacht and Ship Company represents fine sail and power yachts worldwide, both new and used. The majority of our many listings are just minutes away from our office. Call or email for an appointment and let Jordan Yacht and Ship Company help you launch your dreams.

"Choosing Jordan Yacht & Ship Co. as the Broker for the Sale of our Yacht was our good fortune. Richard, Kathy & the complete staff at Jordan Yacht & Ship Co. combined their years of experience, marketing expertise and professionalism to sell our yacht in less than 90 Days. They provided us with excellent advice throughout the entire process from listing right through to the delivery for the new owners. Their abilities to utilize all the most current and technical methods for media marketing are second to none! It is often said that the two best days of boat ownership are the day you buy and the day you sell, we can personally attest that they really will be, if you are buying or selling when you choose Jordan Yacht & Ship Co. to work for you." - JBOR & KRH, SV Lei'd Ba'k