name of medication

September 19, 2009

Anchor Windlass Types – Vertical, Horizonal, Capstan

Filed under: Yachting — Tags: , , , , , , , — Richard Jordan @ 2:50 pm
Shows the parts of a windlass setup (Wikipedia)

Shows the parts of a windlass setup (Wikipedia)

Anchor windlasses let out and retrieve anchors. A windlass manages the rode (chain and/or rope) which attaches the anchor to the bitter end of the hull. The windlass neatly dispenses out and draws back in the rode. The bitter end is a fixture in the forward chain locker. The rode attaches one end to the fixture and travels up through a spill hole, hawser hole, up to the windlass. The rode then wraps around the wheel of the windlass. The wheel is known as variously: gypsy, wildcat, chainwheel, or warping head. The wheel engages the rode for letting out and drawing in. Finally, the rode goes out the windlass wheel, over the bow roller, and attaches to the anchor. The windlass wheel can orient horizontally or vertically. The horizontal way is called a windlass, the vertical a capstan. We assume the windlass as electrically powered.

The axis is horizonal on the traditional windlass.  All parts are above deck.

The axis is horizonal on the traditional windlass. All parts are above deck.

Horizontal Windlass
The traditional horizontal windlass is simple. The wheel, gearbox, and motor are all on deck. All the parts are right there for maintenance making work simple. Every piece is out in the open and enclosed in one protected manifold. Installing means just screwing the windlass down in a good spot over the chain locker with a spill hole for the rode. The chain flows naturally off the horizontal wheel and down the hole with the same compass and angle. The lines flow without kinking or jamming. An nice extra is the ability to have dual wheels. A horizontal windlass can maintain a wheel one each side for a double bow roller set up.

A vertical windlass, capstan, has most parts under the deck.  The wheel rotates around a vertical axis like a winch.

A vertical windlass, capstan, has most parts under the deck. The wheel rotates around a vertical axis like a winch.

Vertical Capstan
A capstan like a winch rotates around a vertical axis freeing up space. The gearbox and motor are below deck while the wheel pokes above. Most of the windlass is below deck, safe and invisible. The capstan is free laterally. The capstan feeds out the rode without a dedicated angle. The bow roller and capstan can offset any different directions. They are not necessarily in line or centerline. A side benefit is a lower center of gravity. With the bulk of the parts below deck, the boat may go faster and stabler through the water. The parts solidify the boat’s performance.

Conclusion
Two types of windlass are vertical and horizontal (capstan). A windlass can also power by manual and hydraulics in addition to electrical. A windlass is a must have for large boats and rough seas. The windlass capacity should be three times the weight of the anchor plus rode. For example, a 40′ boat might have a 50 pound anchor plus 200 feet of 3/8″ chain (156 pounds per 100 feet). That is ~350 pounds. The windlass capacity would be 3 x 350 ~= 1,000 pounds. Prices range from $500 for a 500 pound windlass to $5,000 for a 3,000 pounder with double wheels. Price are the same for corresponding capacity horizontal and vertical types. Maxwell and Lewmar are two dominant brands. IDEAL is another good one.

Looking to Purchase or Sell Your Yacht? Please Contact Us.

Our professional and knowledgeable brokers are not only attuned to the ever changing international market but also have thousands of bluewater miles under their belts. We have the experience and integrity to ensure that your purchase of a boat will be a decision that you can be proud of.

Jordan Yacht and Ship Company represents fine sail and power yachts worldwide, both new and used. The majority of our many listings are just minutes away from our office. Call or email for an appointment and let Jordan Yacht and Ship Company help you launch your dreams.

  • Black Fox

    Ahoy mateys. It’s I, Black Axel the Pirate of Monkey Isle. I decided to weight anchor and head in. A squall was coming. “Begad, the devil is already here,” I thought. I swung from stay to stay like a grasshopper. I landed on the foredeck, grabbed the rode, and started pulling. I pulled and pulled. With each pull, the sea swelled knocking me like Cat o’ nine tails. “The rode’ll ne’er end.” A blasted, foul wave dropped from starboard. I braced against my wooden leg and pulled in the first links of chain. Then, another way from port threw me athwartship, over the lifelines, and into the briny deep. Don’t afear looking like a sissy, mateys. A fine windlass can do ye well.

    Arghh, an electric windlass can save ye life. As I was swept o’er board pulling up the rode, I luckily latched me hook (Big Red, the villainous swab, cut me right hand off) on the toe rail. I dragged meself back aboard and hunkered down. I spilled whale oil all around me boat to calm the furious sea and fend off Poseidon. Despite me poxy ways, I’m a god fearing pirate. A sailor can’t help be. Mateys, you do well to have a fine windlass.

  • I’m interested in d topic pls enligthen me more

    Parts of a windlass

  • Very useful introduction about different types of anchor winches. It matters a lot to choose a right and suitable anchor winch for a boat to ensure the reliable anchoring operations.

"Overall I must say I am quite pleased with the work you have done. Its not easy to sell a thirty year old boat. I think Tom is a huge asset. His knowledge in all areas is a great help. He didnt give up. I would be happy to recomend you." - JD, SV John Galt